1-20
Cisco ONS 15454 DWDM Procedure Guide, R8.0
78-17704-02
Chapter 1 Install the Shelf and Common Control Cards
NTP- G8 Install the Air Ramp for Standard and Deep Door ONS 15454
Figure 1-7 Positioning 19” or 23” Reversible Brackets on ONS 15454 ANSI with STD Door and
Spool
Step 8 To install the 19-inch and 23-inch brackets in an ONS 15454 ANSI deep door, remove the screws that
attach the mounting bracket to the side of the shelf assembly.
Step 9 Align the mounting bracket screw holes against the shelf assembly screw holes according to Figure 1-8.
Step 10 The bracket mounting holes will align with the forward-most mounting holes on the air ramp. When
aligned properly the mounting flange will be 80 mm from the front edge of the air ramp.
240851
124 mm 124 mm
Side View
Front
Front
To Next Page
Loading...
