6 Cisco Small Business RV 120W Quick Start Guide
Connecting Your Hardware
STEP 1 You should have an Ethernet cable connecting your PC to your
current cable or DSL modem. Unplug one end of the cable from
your PC and plug it into the port marked “WAN” on the unit. Click
Next.
STEP 2 Connect one end of a different Ethernet cable to one of the LAN
(Ethernet) ports on the back of the unit. (In this example, the LAN 2
port is used.) Connect the other end to an Ethernet port on the PC
that is running the Setup Wizard. Click Next.
To Next Page
Loading...
