EasyManuals Logo

Cisco RV130W Features & Specifications

Cisco RV130W
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 5
Easy to set up and use right out of the box, both solutions feature simple wizard-based configuration to get you up
and running in minutes.
Like the RV215W, the Cisco RV130W has a USB port to enable 3G and 4G WAN failover connectivity that is also
perfect for remote regions or temporary connectivity. This multi-use router is a cost-effective way to provide
business-class performance, security, and reliability your employees need today, with the flexibility to change as
your business evolves.
Product Specifications
Table 1 lists the product specifications for the Cisco RV130W.
Table 1. Product Specifications
Specifications
Description
Standards
IEEE 802.11n, 802.11g, 802.11b, 802.3, 802.3u, 802.1D, 802.1p, 802.1w (Rapid Spanning Tree) 802.1X (security
authentication), 802.1Q (VLAN), 802.11i (Wi-Fi Protected Access [WPA2] security), 802.11e (wireless QoS), IPv4 (RFC
791), IPv6 (RFC 2460), Routing Information Protocol (RIP) v1 (RFC 1058), RIP v2 (RFC 1723)
Ports
LAN, WAN, USB
Switch
Power button (on/off)
Buttons
Reset
Cabling Type
Category 5e or better
LEDs
Power, VPN, USB, WAN, Wireless, LAN (ports 1-4)
Operating System
Linux
Network
Network Protocols
Dynamic Host Configuration Protocol (DHCP) server
Point-to-Point Protocol over Ethernet (PPPoE)
Point-to-Point Tunneling Protocol (PPTP)
Layer 2 Tunneling Protocol (L2TP)
DNS proxy
DHCP relay agent
IGMP proxy and multicast forwarding
Rapid Spanning Tree Protocol (RSTP)
Dynamic Domain Name System (TZO, DynDNS, 3322.org, NOIP)
Network Address Translation (NAT), Port Address Translation (PAT)
One-to-One NAT
Port management
Port mirroring
Software configurable DMZ to any LAN IP address
Session Initiation Protocol (SIP) Application Layer Gateways (ALG)
LAN
Four (4) 10/100/1000 Mbps Gigabit LAN ports with managed switch
WAN
Single (1) 10/100/1000 Mbps Gigabit WAN port
WLAN
Built-in high-speed 802.11n wireless access point
Routing Protocols
Static routing
Dynamic routing
RIP v1 and v2
Inter-VLAN routing
Network Address
Translation (NAT)
Port Address Translation (PAT), Network Address Port Translation (NAPT) protocol
VLAN Support
Port-based and 802.1Q tag-based VLANs
Number of VLANs
5 active VLANs (3-4096 range)

Other manuals for Cisco RV130W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV130W and is the answer not in the manual?

Cisco RV130W Specifications

General IconGeneral
DSL WAN-
Ethernet WANYes
SIM card slotNo
Wi-Fi bandSingle-band (2.4 GHz)
Wi-Fi standardsWi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1000 Mbit/s
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1D, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
USB 2.0 ports quantity1
Supported network protocolsDHCP, PPPoE, PPTP, L2TP, DNS, IGMP, RSTP
Antennas quantity2
Security algorithmsWEP, WPA, WPA2-PSK
Product typeTabletop router
Product colorBlack
LED indicatorsLAN, Power, USB, WAN, WLAN
Output voltage12 V
Power source typeDC
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 85 %

Related product manuals