Cisco SCE 8000 - Cisco SCE 8000 Installation Checklist

46
• Setting the Locale and Time Zone, page 46
Hardware
The hardware requirements are:
• Minimum 800 MHz CPU
• Minimum 2 GB RAM per CPU
• Hard disk:
– One hard disk, at least 18 GB
• Minimum 100BASE-T network interface
Software and Environment
The software and environment requirements are:
• Red Hat Linux 5.0:
– glibc-2.5-12 or later
– compat-libstdc++-33-3.2-61 or later
– kernel-2.6.18-8.el5 or later
– RHEL 5.x
• Red Hat Linux 6.0
– kernel-2.6.18-8.el5
– glibc-2.5-12
– compat-libstdc++-33-3.2-61
• Red Hat Enterprise Base Installation.
• Apply the latest recommended patches from Red Hat.
• Reserve at least 8 GB free on the partition where the Collection Manager is to be installed. (This is used for CSV storage
and persistent buffers.)
• If you are using database periodic delete, the scmscm user should be able to schedule and run cron jobs.
Setting the Locale and Time Zone
For correct Collection Manager, U.S. English locale (en_US) must be used.