EasyManuals Logo

Cisco SD208T-NA User Manual

Cisco SD208T-NA
283 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #102 background imageLoading...
Page #102 background image
Port Management
Setting Basic Port Configuration
Cisco Small Business 200 Series Smart Switch Administration Guide 103
9
Administrative Status—Select whether the port must be Up or Down when
the switch is rebooted.
Operational Status—Displays whether the port is currently Up or Down.
Reactivate Suspended Port—Select to reactivate a port that has been
suspended. There are numerous ways that a port can be suspended, such
as through the locked port security option, dot1x single host violation,
loopback detection, or STP loopback guard. The reactivate operation brings
the port up without regard to why the port was suspended.
Auto-Negotiation—Select to enable auto-negotiation on the port. Auto-
negotiation enables a port to advertise its transmission speed, duplex mode,
and Flow Control abilities to the port link partner.
Operational Auto-Negotiation—Displays the current auto-negotiation
status on the port.
Administrative Port Speed—Configure the speed of the port. The port
type determines which the available speeds. You can designate
Administrative Speed only when port auto-negotiation
is disabled.
Operational Port Speed—Displays the current port speed that is the result
of negotiation.
Administrative Duplex Mode—Select the port duplex mode. This field is
configurable only when auto-negotiation is disabled, and the port speed is
set to 10M or 100M. At port speed of 1G, the mode is always full duplex. The
possible options are:
- FullThe interface supports transmission between the switch and the
client in both directions simultaneously.
- HalfThe interface supports transmission between the switch and the
client in only one direction at a time.
Operational Duplex Mode—Displays the port’s current duplex mode.
Auto Advertisement—Select the capabilities advertised by auto-
negotiation when it is enabled. The options are:
- Max Capability—All port speeds and duplex mode settings can be
accepted.
- 10 Half10 Mbps speed and Half Duplex mode.
- 10 Full10 Mbps speed and Full Duplex mode.
- 100 Half100 Mbps speed and Half Duplex mode.

Table of Contents

Other manuals for Cisco SD208T-NA

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SD208T-NA and is the answer not in the manual?

Cisco SD208T-NA Specifications

General IconGeneral
BrandCisco
ModelSD208T-NA
CategorySwitch
LanguageEnglish

Related product manuals