1
Cisco Small Business 200 Series Smart Switch Administration Guide 7
Getting Started
This section provides an introduction to the web-based configuration utility, and
covers the following topics:
• Starting the Web-based Switch Configuration Utility
• Quick Start Switch Configuration
• Interface Naming Conventions
• Window Navigation
Starting the Web-based Switch Configuration Utility
This section describes how to navigate the web-based switch configuration utility.
If you are using a pop-up blocker, make sure it is disabled.
Browsers have the following restrictions:
• If you are using older versions of Internet Explorer, you cannot directly use
an IPv6 address to access the switch. You can, however, use the DNS
(Domain Name System) server to create a domain name that contains the
IPv6 address, and then use that domain name in the address bar in place of
the IPv6 address.
• If you have multiple IPv6 interfaces on your management station, use the
IPv6 global address instead of the IPv6 link local address to access the
switch from your browser.
To Next Page
Loading...
Need help?
General
