VLAN Management
Voice VL AN
Cisco Small Business 200 Series Smart Switch Administration Guide 175
12
• Source Type—Displays the type of source where the voice VLAN is
discovered by the root switch.
• CoS/802.1p—Displays CoS/802.1p values to be used by the LLDP-MED as
a voice network policy.
• DSCP—Displays DSCP values to be used by the LLDP-MED as a voice
network policy.
• Root Switch MAC Address—The MAC address of the Auto Voice VLAN root
device that discovers or is configured with the voice VLAN from which the
voice VLAN is learned.
• Switch MAC Address—Base MAC address of the switch. If the device's
Switch MAC address is the Root Switch MAC Address, the device is the
Auto Voice VLAN root device.
• Voice VLAN ID Change Time—Last time that voice VLAN was updated.
STEP 2 Click Restart Auto Voice VLAN to reset the voice VLAN to the default voice VLAN
and restart Auto Voice VLAN discovery on all the Auto-Voice-VLAN-enabled
switches in the LAN.
The Voice VLAN Local Table displays voice VLAN configured on the switch, as
well as any voice VLAN configuration advertised by directly-connected neighbor
devices. It displays the following fields:
• Interface—Displays the interface on which voice VLAN configuration was
received or configured. If N/A is displayed, the configuration was done on
the switch itself. If an interface is displayed, a voice configuration was
received from a neighbor.
• Source MAC Address— MAC address of a UC from which the voice
configuration was received.
• Source Type— Type of UC from which voice configuration was received.
The following options are available:
- Default—Default voice VLAN configuration on the switch
- Static—User-defined voice VLAN configuration defined on the switch.
- CDP—UC that advertised voice VLAN configuration is running CDP.
- LLDP—UC that advertised voice VLAN configuration is running LLDP.
- Voice VLAN ID—The identifier of the advertised or configured voice
VLAN
To Next Page
Loading...
Need help?
General
