Required Equipment For Service Procedures 26
Shutting Down and Removing Power From the Server 27
Shutting Down Using the Power Button 27
Shutting Down Using The Cisco IMC GUI 27
Shutting Down Using The Cisco IMC CLI 28
Removing the Server Top Cover 28
Serial Number Location 29
Hot Swap vs Hot Plug 29
Removing and Replacing Components 30
Serviceable Component Locations 30
Replacing SAS/SATA Hard Drives or Solid State Drives 32
SAS/SATA Drive Population Guidelines 32
4K Sector Format SAS/SATA Drives Considerations 33
Replacing a SAS/SATA Drive 33
Replacing a Front-Loading NVMe SSD 34
Front-Loading NVMe SSD Population Guidelines 34
Front-Loading NVME SSD Requirements and Restrictions 35
Enabling Hot-Plug Support in the System BIOS 35
Replacing a Front-Loading NVMe SSD 36
Installing a PCIe Cable For Front-Loading NVMe SSDs 37
Replacing Fan Modules 38
Replacing CPUs and Heatsinks 39
CPU Configuration Rules 39
Tools Required For CPU Replacement 39
Replacing a CPU and Heatsink 40
Moving an M5 Generation CPU 46
Replacing Memory DIMMs 51
DIMM Population Rules and Memory Performance Guidelines 51
Replacing DIMMs 53
Replacing a Mini-Storage Module 53
Replacing a Mini-Storage Module Carrier 54
Replacing an M.2 SSD in a Mini-Storage Carrier For M.2 55
Replacing an Internal USB Drive 56
Replacing a USB Drive 56
Cisco Application Services Engine Hardware Installation Guide
iv
Contents
To Next Page
Loading...
Need help?
General