Viewing Statistics
Managing RMON Statistics
Cisco Small Business 300 Series Managed Switch Administration Guide 23
2
• Falling Threshold—Enter the falling counter value that triggers the falling
threshold alarm.
• Falling Event—Selects an event, from those defined in the Events table, to
be performed when a falling event is triggered.
• Startup Alarm—Select the first event from which to start generation of
alarms. Rising is defined by crossing the threshold from a low-value
threshold to a higher-value threshold.
- Rising Alarm—A rising counter value triggers the rising threshold alarm.
- Falling Alarm—A falling counter value triggers the falling threshold alarm.
- Rising and Falling—Both a rising and falling counter values trigger the
alarm.
• Interval—Enter the alarm interval time in seconds.
• Owner—Enter the name of the user or network management system that
receives the alarm.
STEP 4 Click Apply. The RMON alarm is added and the switch is updated.
To Next Page
Loading...
