Access Control
Defining ACL Binding
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3 474
24
• Permit Any—Select one of the following options:
- .Disable (Deny Any)—If packet does not match an ACL, it is denied
(dropped).
- Enable—If packet does not match an ACL, it is permitted (forwarded).
NOTE Permit Any can be defined only if IP Source Guard is not activated on
the interface.
STEP 7 Click Apply. The ACL binding is modified, and the Running Configuration file is
updated.
NOTE If no ACL is selected, the ACL(s) that is previously bound to the
interface is unbound.
To Next Page
Loading...
Need help?
General
