Cisco SG300 User Manual

Cisco SG300 SETUP GUIDE
07
contact techsupport@elanhomesystems.com
To enable IGMP snooping, there are several steps required to enable this feature:-
• Bridge Video Over IP Filter Status
• IGMP Snooping Status
• IGMP Querier Status
• MRouter Ports Auto Learn
• Immediate Leave
• IGMP Querier Election
The following pages explain how to update the above settings.
IGMP Snooping
Under ‘Video Over IP’ menu
Select ‘Properties’
Tick ‘Enabled’ checkbox adjacent to ‘Bridge Video Over IP Filter Status’
IGMP Snooping - Bridge Video Over IP Filter Status
Conrm other settings match those as shown in the above image
Click ‘APPLY’ to update the setting

Cisco SG300 Specifications

General

Port Type	RJ-45
Gigabit Ethernet	Yes
Power Supply	Internal
Jumbo Frame Support	Yes (up to 9216 bytes)
Model	SG300
Layer	Layer 3
Management	Web-based, CLI, SNMP
Dimensions	Varies by model
Weight	Varies by model
VLAN Support	Yes
Operating Temperature	32°F to 113°F (0°C to 45°C)
Storage Temperature	-20° to 70°C (-4° to 158°F)
Relative Humidity	10% to 90% noncondensing
Input Voltage	100-240 VAC
Input Frequency	50-60 Hz
Power Consumption	Varies by model
Heat Dissipation	Varies by model
Security Features	ACLs
Warranty	Lifetime