Smartport
Overview
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x 176
10
The macro source may be found by running the show parser macro name [macro_name]
command in privileged exec mode of the CLI or by clicking the View Macro Source button
on the Type Settings page.
A macro and the corresponding anti-macro are paired together in association with each
Smartport type. The macro applies the configuration and the anti-macro removes it.
There are two types of Smartport macros:
• Built-In—These are macros provided by the system. One macro applies the
configuration profile and the other removes it. The macro names of the built-in
Smartport macros and the Smartport type they are associated with as follows
- macro-name (for example: printer)
- no_macro-name (for example: no_printer)
• User-Defined—These are macros written by the users. See the CLI Reference Guide
for more information about these. To associate a user defined macro to a Smartport
type, its anti macro must be defined as well.
- smartport-type-name (for example: my_printer)
- no_smartport-type-name (for example: no_my_printer)
Smartport macros are bound to Smartport types in the Type Settings page.
See Built-in Smartport Macros for a listing of the built-in Smartport macros for each device
type.
Applying a Smartport Type to an Interface
When Smartport types are applied to interfaces, the Smartport types and configuration in the
associated Smartport macros are saved in the Running Configuration File. If the administrator
saves the Running Configuration File into the Startup Configuration File, the device applies
the Smartport types and the Smartport macros to the interfaces after reboot as follows:
• If the Startup Configuration File does not specify a Smartport type for an interface, its
Smartport type is set to Default.
• If the Startup Configuration File specifies a static Smartport type, the Smartport type of
the interface is set to this static type.
• If the Startup Configuration File specifies a Smartport type that was dynamically
assigned by Auto Smartport:
To Next Page
Loading...
Need help?
General
