Administration
Discovery - Bonjour
77 Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
5
Discovery - Bonjour
See Bonjour.
Discovery - LLDP
See Discover - LLDP.
Discovery - CDP
See Discovery - CDP.
Ping
The Ping utility tests if a remote host can be reached and measures the round-trip time for
packets sent from the device to a destination device.
Ping operates by sending Internet Control Message Protocol (ICMP) echo request packets to
the target host and waiting for an ICMP response, sometimes called a pong. It measures the
round-trip time and records any packet loss.
To ping a host:
STEP 1 Click Administration > Ping.
STEP 2 Configure ping by entering the fields:
• Host Definition—Select whether to specify the source interface by its IP address or
name. This field influences the interfaces that are displayed in the Source IP field, as
described below.
• IP Version—If the source interface is identified by its IP address, select either IPv4 or
IPv6 to indicate that it will be entered in the selected format.
To Next Page
Loading...
Need help?
General
