Security: SSH Client
Overview
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x 340
19
The following algorithms are supported on the client side:
• Key Exchange Algorithm-diffie-hellman
• Encryption Algorithms
- aes128-cbc
- 3des-cbc
- arcfour
- aes192-cbc
- aes256-cbc
• Message Authentication Code Algorithms
- hmac-sha1
- hmac-md5
NOTE Compression algorithms are not supported.
Before You Begin
The following actions must be performed before using the SCP feature:
• When using the password authentication method, a username/password must be set up
on the SSH server.
• When using public/private keys authentication method, the public key must be stored
on the SSH server.
Common Tasks
This section describes some common tasks performed by the device as a SSH client. All pages
referenced are pages found under the SSH Client branch of the menu tree.
To Next Page
Loading...
Need help?
General
