Smart Network Application (SNA)
Right-Hand Information Panel
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x 660
29
The following information is displayed for offline backbone devices under Last Known
Information:
System Uptime The time in days, hours, minutes and
seconds since the device was booted up.
System Local
Time
The local time on the device, in the
format of the active language file.
English language file
example:
2015-Nov-04 17:17:53
Number of
Units
Only appears on stackable devices. 2
PoE Power on
unit #/Available
PoE Power
Displayed only on PoE-capable devices.
Displays the available power used out of
the maximum power supply.
If the device is a stacked device, a field
appears for each PoE-capable unit in the
stack with the unit ID. If the device is
standalone or a single unit, the label of
the field does not mention the unit ID.
This means that a maximum of eight
fields may appear here.
15.22W/18.0W
Parameter Name Notes Example
Product Name Taken from the device description
MIB.
This field only appears when the
device is a switch with partial or full
SNA capabilities.
SG500-52P - 52-Port Gigabit
PoE Stackable Managed
Switch
Host Name String of up to 58 characters RND_1
IP Address Displays the last IP address used to
connect to the device when last seen.
192.168.1.55
MAC Address The base MAC address of the device 00:00:b0:83:1f:ac
Description Editable field of a maximum of 80
characters.
Parameter
Name
Notes Example
To Next Page
Loading...
Need help?
General
