Port Management
Link Aggregation
Cisco Small Business SLM Series Smart Switches Administration Guide 18
2
The
Link Aggregation
window contains fields for configuring parameters for
configured LAGs. LAGs offer a dramatic increase in bandwidth for network
segments where bottlenecks exist, as well as providing a fault-tolerant link
between two devices. The device supports up to eight ports per LAG, and eight
LAGs per system.
To open the
Link Aggregation
window:
STEP 1 Click Port Management > Link Aggregation. The
Link Aggregation
window
appears.
Link Aggregation
The
Link Aggregation
window contains the following fields:
• LAG — Displays the LAG ID number.
• Description — Displays the user-defined LAG name.
• Admin Status — Enables or disables traffic forwarding through the selected
LAG.
• Type — The port types that make up the LAG. The possible field values are:
-
eth100M
-
eth1000m
To Next Page
Loading...
