Multicast
Bridge Multicast
Cisco Small Business SLM Series Smart Switches Administration Guide 65
8
The
Bridge Multicast
window is divided into two areas, Configuring Multicast and
Multicast Table.
To open the
Bridge Multicast
window:
STEP 1 Click Multicast > Bridge Multicast. The
Bridge Multicast
window appears.
Bridge Multicast
The
Bridge Multicast
window contains the following fields:
• VLAN ID — Identifies a VLAN to be configured to a Multicast service.
• Bridge Multicast Address — Identifies the Multicast group MAC address.
• Enable Bridge Multicast Filtering — Enables or disables Bridge Multicast
Filtering on the device.
The configuration options are as follows:
• Interface — Indicates the interface with the configuration options below.
• Static — Indicates the port is manually configured to a Multicast group.
• Dynamic — Indicates the port is configured dynamically.
• None — The port is not configured for Multicast service.
To Next Page
Loading...
