Cisco SPA 303

12
TRANSFERRING CALLS
Blind Transfers:
1. While on a call, press the right arrow key.
2. Locate and press the “Bxfer” or “BlindXfer” Soft key.
(Press the right arrow if necessary).
3. Dial the desired phone number or extension number.
4. The call is automatically transferred.
Attended (Consultative or Warm) Transfers:
1. While on a call, press the “Xfer” or “Transfer” Soft key.
2. Dial the desired phone number or extension number.
3. Wait for the party to answer, and announce that you are
transferring a call to them.
4. Press the “Xfer” or “Transfer” Soft key to complete the transfer.
MUTE
1. To mute the microphone on an active call, press the “Mute” button.
2. To un-mute the microphone, press the “Mute” button again.
VOICEMAIL
1. Press the “Messages” button
.
2. Enter your PIN when prompted.