Cisco SPA 303 Quick Start Guide

14
SPEAKERPHONE
While the phone is not in use:
• Press the “Speakerphone” button to activate the speakerphone and
get dial tone for an outbound call.
While on a call on the handset / headset:
• Press the “Speakerphone” button to continue the current call on the
speakerphone.
While a call on speakerphone is active:
• To hang up the current call, press the “Speakerphone” button.
FORWARDING ALL CALLS
1. Press the “Cfwd” or “Forward” Soft key.
2. Enter / verify the contact number where calls will be forwarded.
SPA 525G2: FORWARDING ALL, BUSY OR NO ANSWER CALLS
1. Press the “Menu” button, and then Option 7.
2. Press Option 1 for Call Preferences.
3. Use the arrow keys to select the type of forwarding you want.
4. Enter / verify the contact number where calls will be forwarded.
5. Press the “Set” Soft key.

Cisco SPA 303 Specifications

General

Keypad number of keys	12
Display resolution	128 x 64 pixels
Call waiting	Yes
Lines quantity	3 lines
Phonebook capacity	60 entries
Do not disturb function	No
Voice codecs	G.711, G.722
Supported network protocols	IPv4 (RFC 791), ARP, DNS (RFC 1706), SRV (RFC 2782), DHCP (RFC 2131), ICMP (RFC 792), TCP (RFC 793), UDP (RFC 768), RTP (RFC 1889, 1890), RTCP (RFC 1889), RTCP-XR (RFC 3611), DiffServ (RFC 2475), ToS (RFC 791, 1349), SNTP (RFC 2030)
Headphone outputs	1
Ethernet LAN (RJ-45) ports	2
Suitable for use in country/location	Europe
Input voltage	100 - 240 V
Dimensions (WxDxH)	220 x 30 x 198 mm
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product type	IP Phone
Product color	Gray
Certification	FCC (15, B), UL, CE, A-Tick
Compliance industry standards	IEEE 802.1p/Q, IEEE 802.3

Weight and Dimensions

Weight	680 g