Cisco SPA 504G - Commonly Used Features; Placing Outgoing Calls; Answering an Incoming Call

10
Commonly Used Features
PLACING OUTGOING CALLS
When the phone is not in use:
1. Pick up the Handset or press the “Speakerphone” button.
2. Dial a 3-digit extension or telephone number.
When you are already on a call:
1. Press a Line Button on the right of the display. This will place the
rst call on hold AND give a dial tone to make a second call.
2. Dial a 3-digit extension or telephone number.
3. Press the “Dial” Softkey.
4. Resume the original call by pressing the Line Button that
corresponds with that call.
ANSWERING AN INCOMING CALL
…On the Handset:
Pick up the handset to answer the call.
…On a Headset:
When a headset is connected, press the “Headset” button (or the
”Answer” Softkey) to answer the call.
…On Speakerphone:
Press the “Speaker” button (or the “Answer” Softkey) to answer the call.