Cisco SPA 504G User Manual

7 | P a g e
3. For a supervised transfer stay on the line, press the Xfer button then hang up
4. For a blind transfer press the Xfer button then hang up.
5. The caller will be sent .
Call Parking
- To Park a caller
1. While live on a call press Xfer 70
2. The phone will verbally annouce what parking slot. 71, 72, 73
3. Press the Xfer soft key and hang up.
 The first caller will be parked on Park 1(71), the second call Park 2 (72) etc…
- To pick up a Parked call method 1
1. Press Park 1, Park 2, Park 3 softkey.
- To pick up a Parked call method 2
1. Pick up the phone or press the speaker button.
2. Dial 71 or 72 or 73 etc…
Voicemail
- Setup Voicemail
1. Press the Voice Mail button.
2. Press 1111 (Default Password)
3. Press 0 for mailbox options.
4. Press Options softkey
5. Record : Name, Unavailable Greeting, Busy Greeting.
6. Press # when done with recording
7. Hang Up or press the speaker button.
- Message Retrieval
- There is a red light at the top of the phone that will blink when you have a new message.
1. Press Voice Mail button

Cisco SPA 504G Specifications

General

Lines	4
Protocols	SIP, SPCP
Speakerphone	Yes
Ethernet Ports	2 (10/100 Mbps)
Power over Ethernet (PoE)	Yes
Voice Codecs	G.711, G.726, G.729
Headset Port	Yes (2.5mm)
Display	Monochrome LCD