EasyManuals Logo

Cisco SPA 508G Quick Start Guide

Cisco SPA 508G
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
myDatavo Model SPA 504G Quick Start User Guide
|
3
Softkey Buttons
Press the right arrow on the navigation button to view additional softkey buttons. Below is a partial listing of
softkey buttons that are available on your phone.
# Phone Feature Discription
10
Mute button Press to mute or unmute the phone. When phone is muted, the button glows red. A flashing
mute button indicates the network connection cannot be found.
11
Headset button Push to turn the headset on or off. When the headset is on, the button glows green.
12
Volume button Press + to increase the volume and - to lower the volume of the handset, headset, speaker
(when the handset is off the phone), or ringer volume (when the handset is on the phone).
13
Speaker button Push to turn the speaker on or off. When the speaker is on, the button glows green.
14
Keypad Use to dial phone numbers, enter letters and choose menu items.
Phone Feature Discription
<< or >> Move left or right through an entry without deleting characters.
add Add an entry
apps Push to turn the headset on or off. When the headset is on, the button glows green.
bx fer
Performs a blind call transfer (transferring a call without speaking to the party to whom you are trans-
ferring the call).
Callpark
Puts a call on hold at a designated “park” number. The call is parked on the line until you unpark it
or the caller disconnects. Must be configured by your phone system administrator.
Cancel Cancels any changes you have made (press cancel before pressing Ok or save).
cfwd Forwards all calls coming to your phone to a specified number.
-cfwd Clears Call Forward.
clear Clears the entry.
conf Initiates a conference call.
confLx Brings active lines on the phone together into a conference call.
confserv Dials into the conference bridge.
delChr Deletes the last number or letter.
delete Deletes an entire item (for example, a number from the Call History list).
dial Dials a number.
dir Do Not Disturb; prevents incoming calls from ringing your phone.
dnd Do Not Disturb; prevents incoming calls from ringing your phone.
-dnd Clears Do Not Disturb.
edit Opens an item so that you can edit numbers or letters, or enable or disable a feature.
editCall Ends the call in progress.
exit Closes a menu.
hold Places a call on hold.
intercom Allows you to automatically connect to a remote extension.
join Joins two calls into a conference call and drops you from the call.

Other manuals for Cisco SPA 508G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SPA 508G and is the answer not in the manual?

Cisco SPA 508G Specifications

General IconGeneral
SpeakerphoneYes
Dialer locationBase
Mac compatibilityNo
Ethernet LAN (RJ-45) ports2
Display resolution128 x 64 pixels
Display number of colorsMonochrome
Headphone connectivity2.5 mm
Weight and Dimensions IconWeight and Dimensions
Depth212 mm
Width214 mm
Height44 mm
Weight900 g

Related product manuals