Cisco SPA525G Quick Start Guide

Wireless Status on SPA525G or SPA525G2 IP
Phones
Objective
This document showcases the procedure to check the wireless status on the SPA525G or
SPA525G2 IP phones. The wireless status gives the information if the SPA525G/SPA525G2
is connected properly to the Wi-Fi network and simultaneously gives notification of signal
strength, network name etc.
Applicable Devices
• SPA 525G
• SPA 525G2
Wireless Status.
Step 1. Press the Setup button on the phone. The Information and Settings menu appears.
Step 2. Use the navigation keys and scroll down to Network Configuration. Press the Select
softkey. The Network Configuration menu appears.

Cisco SPA525G Specifications

General

Lines	5 lines
Protocols	SIP, SPCP
Power	Power over Ethernet (PoE) or AC adapter
Speakerphone	Yes
Connectivity	Bluetooth
Audio	Wideband audio
USB	USB 2.0 port
Ethernet Ports	2 x 10/100 Mbps
Codecs	G.711, G.729, G.722
Display	3.2 inch QVGA (320 x 240 pixels) color LCD