EasyManuals Logo
Home>Cisco>Conference System>TelePresence System Codec C60

Cisco TelePresence System Codec C60 Administrator's Guide

Cisco TelePresence System Codec C60
151 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #126 background imageLoading...
Page #126 background image
D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
126
Cisco TelePresence System Codec C40/C60 and Profiles using C40/60 Administrator Guide
Setting the menu password from the web
interface
1. Sign in to the web interface with your user name and
current password.
2. Go to Configuration > System Configuration.
3. Click Set/Change Administrator Settings menu password
to open the menu password dialog.
4. Enter the password in the input field.
5. Click Save to set/change the password.
Use the remote control and on-screen menu, or the
Touch controller to find the IP address (IPv4 orIPv6).
Remote control and on-screen menu: Navigate to
Home > Settings > System information.
Touch controller: Tap the upper, left corner of the
Touch controller to open the drop down window. Then
tap Settings > System Information.
Setting the menu password using the remote
control
1. In the on screen menu, go to Home > Settings >
Administrator settings > Set menu password.
The password should be a string with 0–255 characters.
To deactivate the password leave the password input
field empty.
2. Enter the menu password in the input field. The password
you enter is hidden; each character is replaced with a star
(*).
On the remote control, press the # key to toggle between
lower or upper case characters and numbers: abc/
ABC/123.
3. Select Save to save the changes, or Cancel to leave
without saving.
4. Press Home (
) to exit.
Setting the menu password
The menu password protects the Administrator Settings
menu that is available on-screen when using the remote
control.
When starting up the video conference system for the first
time anyone can access these settings, because the menu
password is not set.
We strongly recommend that you set a menu
password, because the administrator settings may
severely affect the behavior of the system.
Note that the menu password, as from software version
TC7.0, applies only to the on-screen Administrator Settings
menu; it does not apply to the Administrator menu on the
Touch 8 controller.
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Setting passwords

Table of Contents

Other manuals for Cisco TelePresence System Codec C60

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco TelePresence System Codec C60 and is the answer not in the manual?

Cisco TelePresence System Codec C60 Specifications

General IconGeneral
BrandCisco
ModelTelePresence System Codec C60
CategoryConference System
LanguageEnglish

Related product manuals