Cisco TelePresence System Codec C60 Administrator's Guide

D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
127
Cisco TelePresence System Codec C40/C60 and Profiles using C40/60 Administrator Guide
Setting a root password
You can protect the file system of your video system by
setting a password for the root user.
The root user is disabled by default. You have to use the
command line interface to enable the root user and set a root
password.
Activate the root user and set the password
Perform the following steps to activate the root user and set a
password for it:
1. Connect to the system through the network or the
system’s serial data port (if available) and open a
command line interface (SSH or Telnet).
2. Sign in to the system with user name and password. The
user needs ADMIN rights.
3. Type the following command:
systemtools rootsettings on <password>
The root password is not the same as the system
(admin) password.
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Setting passwords

Cisco TelePresence System Codec C60 Specifications

General

Brand	Cisco
Model	TelePresence System Codec C60
Category	Conference System
Language	English