Cisco TelePresence System Codec C60 Administrator's Guide

D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
22
Cisco TelePresence System Codec C40/C60 and Profiles using C40/60 Administrator Guide
Navigate to: Call Control
Controlling your camera
You can control the camera from the Call Control page.
The camera controls (pan, tilt, zoom) are available when
the cursor is placed in the Main Source video area. Live
snapshots are automatically taken during this period.
Note that the camera controls are not availble if the system is
in standby mode.
Camera presets
If a camera preset is defined it is listed
here. Click the preset’s name to move
the camera(s) to the preset position.
Click OK to close the window.
Pan and tilt
Use the left and right arrows
to pan the camera, and the up
and down arrows to tilt it.
Zoom
Use + and - to zoom in and out.
Choose which camera to control
Click the arrow to open the
drop-down list. Then choose the
camera you want to control.
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Web interface

Cisco TelePresence System Codec C60 Specifications

General

Brand	Cisco
Model	TelePresence System Codec C60
Category	Conference System
Language	English