Cisco UCS C200 - Supported Power Cords and Plugs

B-2
Cisco UCS C200 Server Installation and Service Guide
OL-20732-02
Appendix B Cable and Power Cord Specifications
Supported Power Cords and Plugs
Supported Power Cords and Plugs
Each power supply has a separate power cord. Standard power cords or jumper power cords are available
for connection to the server. The jumper power cords, for use in racks, are available as an optional
alternative to the standard power cords.
Note Only the approved power cords or jumper power cords provided with the server are supported.
Table B-1 lists the power cords for the server power supplies.
Ta b l e B-1 Supported Power Cords for the Server
Description
Length
Power Cord Reference
Illustration
Feet Meters
SFS-250V-10A-AR
Power Cord, 250 VAC 10 A IRAM 2073 Plug
Argentina
8.2 2.5 Figure B-2
CAB-9K10A-AU
250 VAC 10 A 3112 Plug,
Australia
8.2 2.5 Figure B-3
SFS-250V-10A-CN
Power Cord, 250 VAC 10 A GB 2009 Plug
China
8.2 2.5 Figure B-4
CAB-9K10A-EU
Power Cord, 250 VAC 10 A M 2511 Plug
Europe
8.2 2.5 Figure B-5
SFS-250V-10A-ID
Power Cord, 250 VAC 16A EL-208 Plug
South Africa, United Arab Emirates, India
8.2 2.5 Figure B-6
SFS-250V-10A-IS
Power Cord, 250 VAC 10 A SI32 Plug
Israel
8.2 2.5 Figure B-7
CAB-9K10A-IT
Power Cord, 250 VAC 10 A CEI 23-16 Plug
Italy
8.2 2.5 Figure B-8
CAB-9K10A-SW
Power Cord, 250 VAC 10 A MP232 Plug
Switzerland
8.2 2.5 Figure B-9
CAB-9K10A-UK
Power Cord, 250 VAC 10 A BS1363 Plug (13 A
fuse)
United Kingdom
8.2 2.5 Figure B-10
CAB-AC-250V/13A
Power Cord, 250 VAC 13 A IEC60320 Plug
North America
6.6 2.0 Figure B-11