Cisco UCS C210 M2 Spec Sheet

Cisco UCS C210 M2 General-Purpose Rack-Mount Server
8
CONFIGURING the SERVER
CONFIGURING the SERVER
Follow these steps to configure the Cisco UCS C210 M2 General-Purpose Rack Server:
■ STEP 1 VERIFY BASE SKU, page 9
■ STEP 2 CHOOSE CPU(S), page 10
■ STEP 3 CHOOSE MEMORY, page 13
■ STEP 4 CHOOSE RAID CONFIGURATION, page 17
■ STEP 5 ORDER SAS EXPANDER AS NEEDED, page 20
■ STEP 6 CHOOSE HARD DISK DRIVES or SOLID STATE DRIVES, page 21
■ STEP 7 CHOOSE PCIe OPTION CARD(S), page 23
■ STEP 8 ORDER OPTIONAL NETWORK CARD ACCESSORIES, page 25
■ STEP 9 CHOOSE OPTIONAL DVD-RW DRIVE, page 28
■ STEP 10 ORDER OPTIONAL REDUNDANT POWER SUPPLY, page 29
■ STEP 11 CHOOSE AC POWER CORDS, page 30
■ STEP 12 ORDER TOOL-LESS OPTIONAL RAIL KIT, page 33
■ STEP 13 ORDER OPTIONAL CABLE MANAGEMENT ARM, page 34
■ STEP 14 ORDER A TRUSTED PLATFORM MODULE, page 35
■ STEP 15 CHOOSE OPERATING SYSTEM AND VALUE-ADDED SOFTWARE, page 36
■ STEP 16 CHOOSE OPERATING SYSTEM MEDIA KIT, page 39
■ STEP 17 CHOOSE SERVICE and SUPPORT LEVEL, page 40
■ OPTIONAL STEP - ORDER RACK(s) on page 44
■ OPTIONAL STEP - ORDER PDU on page 45

Cisco UCS C210 M2 Specifications

General

Brand	Cisco
Model	UCS C210 M2
Category	Server
Language	English