© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 22 of 33
◦ After you have met at least the minimum requirements, click the Create Virtual Drive button to create a
RAID 10 volume. Navigate to the Virtual Drive Info tab to see the RAID 10 volume that has been created.
●
RAID 50 and 60 require a minimum of two drive groups with a minimum of three physical drives in each
drive group.
◦ In the example here, RAID 60 is created with the minimum number of physical drives and drive groups.
◦ Click the Create Virtual Drive button and navigate to the Virtual Drive Info tab to see the RAID 60 volume
that has been created.
To Next Page
Loading...
