© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 17 of 33
Step 1: To create a global hot spare, log in to Cisco IMC and navigate to the Storage tab and then the Physical
Drive Info tab.
Step 2: Select the unconfigured drive; the options for creating a global or dedicated hot spare are displayed in the
Actions area.
Creating a Dedicated Hot Spare
A dedicated hot spare can be used to replace a failed drive only in a chosen drive group. One or more drives can
be designated as members of a spare drive pool. The most suitable drive in the pool is chosen for failover. A
dedicated hot spare is used before a drive in the global hot spare pool.
To Next Page
Loading...
