Cisco UCS C220 M4

Contents
vi
Cisco UCS C220 M4 Server Installation and Service Guide
OL-32473-01
RAID Backup Units C-5
RAID Controller Migration C-6
RAID Controller Cabling C-7
Cable Routing C-7
Cisco UCS C220 M4 Server Cabling C-8
SFF 8-Drive Backplane Cabling C-8
LFF 4-Drive Backplane Cabling C-9
Embedded SATA RAID Controllers C-10
Embedded SATA RAID Controller Requirements C-10
Embedded SATA RAID: Two SATA Controllers C-11
Embedded SATA RAID Controller Considerations C-12
Installing a Software RAID 5 Key Module for Embedded RAID 5 Support C-12
Enabling the Embedded SATA RAID Controller in the BIOS C-12
Enabling SATA Mode and Selecting Option ROM Mode C-13
Disabling the Embedded RAID Controller in the BIOS C-14
Launching the LSI Embedded RAID Configuration Utility C-14
Installing LSI MegaSR Drivers For Windows and Linux C-15
Downloading the LSI MegaSR Drivers C-15
Microsoft Windows Driver Installation C-16
Linux Driver Installation C-18
Restoring RAID Configuration After Replacing a RAID Controller C-23
For More Information C-24
APPENDIX D Installation for Cisco UCS Integration D-1