Cisco UCS C240 M3 - Configuring the Server

Cisco UCS C240 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)
CONFIGURING the SERVER
9
CONFIGURING the SERVER
Follow these steps to configure the Cisco UCS C240 M3 High-Density SFF Rack Server:
■ STEP 1 VERIFY SERVER SKU, page 10
■ STEP 2 SELECT CPU(s), page 11
■ STEP 3 SELECT MEMORY, page 13
■ STEP 4 SELECT RAID CONFIGURATION, page 17
■ STEP 5 SELECT HARD DISK DRIVES (HDDs) or SOLID STATE DRIVES (SSDs), page 22
■ STEP 6 SELECT PCIe OPTION CARD(s), page 24
■ STEP 7 ORDER OPTIONAL NETWORK CARD ACCESSORIES, page 26
■ STEP 8 ORDER POWER SUPPLY, page 29
■ STEP 9 SELECT AC POWER CORD(s), page 30
■ STEP 10 ORDER OPTIONAL REVERSIBLE CABLE MANAGEMENT ARM, page 33
■ STEP 11 ORDER A TRUSTED PLATFORM MODULE, page 34
■ STEP 12 ORDER CISCO FLEXIBLE FLASH SD CARD MODULE (OPTIONAL), page 35
■ STEP 13 ORDER OPTIONAL USB 2.0 DRIVE, page 36
■ STEP 14 SELECT OPERATING SYSTEM, page 37
■ STEP 15 SELECT OPERATING SYSTEM MEDIA KIT, page 39
■ STEP 16 SELECT OPTIONAL VALUE-ADDED SOFTWARE, page 40
■ STEP 17 SELECT SERVICE and SUPPORT LEVEL, page 41
■ OPTIONAL STEP - ORDER RACK(s), page 45
■ OPTIONAL STEP - ORDER PDU, page 46