Cisco UCS S3260 M5 User Manual

Design Criteria
32
 Cisco UCS is a template and policy based infrastructure management tool. All the identity of the servers is
stored through Service Profiles that are cloned from templates. When a template is created, a new service
profile for the additional server, can be created and applied on the newly added hardware. Cisco UCS
makes Infrastructure readiness, extremely simple, for any newly added storage nodes. Rack the nodes,
connect the cables, and then clone and apply the service profile.
 When the nodes are ready, you may have to follow the node addition procedure per the Cloudian
documentation.
The simplified management of the infrastructure with Cisco UCS and well-tested node addition from Cloudian
makes the expansion of the cluster very simple.

Cisco UCS S3260 M5 Specifications

General

Processor	Intel Xeon Scalable processors
Memory	Up to 3TB per node (24 DIMM slots per node)
Storage	Up to 600 TB
Drive Bays	60 x 3.5-inch or 2.5-inch drive bays
Form Factor	4U
Management	Cisco Integrated Management Controller (IMC)
RAID Support	RAID 0, 1, 5, 6, 10, 50, 60