Cisco UCS S3260 Manual

PurposeCommand or Action
Associates the disks in the disk zoning policy
to the chassis with the specified chassis number.
UCS-A org/chassis-profile # associate chassis
chassis-id
Step 5
Example
The following example creates the ch1 chassis profile, sets the disk zoning policy all56shared,
commits the transaction and associates the disk in the all56shared policy with chassis 3:
UCS-A# scope org
UCS-A /org # create chassis-profile ch1
UCS-A /org/chassis-profile* # set disk-zoning-policy all56shared
UCS-A /org/chassis-profile* # commit-buffer
UCS-A /org/chassis-profile # associate chassis 3
UCS-A /org/fw-chassis-pack/pack-image #
Disk Migration
Before you can migrate a disk zoned from one server to another, you must mark the virtual drive(LUN) as
transport ready or perform a hide virtual drive operation. This will ensure that all references from the service
profile have been removed prior to disk migration. For more information on virtual drives, please refer to the
"virtual drives" section in the Cisco UCS Manager Storage Management Guide, Release 3.1.
Procedure
PurposeCommand or Action
Enters chassis mode for the specified chassis.
UCS-A# scope chassis chassis-num
Step 1
Enters the virtual drive container with the
specified number.
UCS-A /chassis# scope
virtual-drive-container
virtual-drive-container-num
Step 2
Enters the virtual drive for the specified virtual
drive container.
UCS-A /chassis/virtual-drive-container# scope
virtual-drive virtual-drive--num
Step 3
Specifies one of the following admin states for
the virtual drive:
UCS-A
/chassis/virtual-drive-container/virtual-drive#
Step 4
scope virtual-drive virtual-drive--num set
admin-state admin-state
• clear-transport-ready — Sets the state
of the virtual drive to no longer be
transport ready.
• delete — Deletes the virtual drive.
• hide— Choose this option for the safe
migration of the virtual drive from one
server to another.
Cisco UCS S3260 System Storage Management
12
Cisco UCS S3260 System Storage Management
Disk Migration

Cisco UCS S3260 Specifications

General

Drive Bays	Up to 56
Maximum Storage Capacity	Up to 600 TB
Power Supply	Up to 4 hot-plug power supplies
Product Type	Storage Server Chassis
Supported Drives	SAS, SATA
Processors	Up to two Intel Xeon Scalable processors
Memory	Up to 1.5 TB DDR4 RAM
Power Supplies	Redundant 80+ Platinum power supplies
Total Drive Bays	56
Management	Cisco UCS Manager
Compatibility	Cisco UCS system
Form Factor	4U rack