Cisco UCS S3260 Service Manual

3-11
Cisco UCS S3260 Storage Server Chassis Installation and Service Guide
Chapter 3 Maintaining the System
Preparing for System Component Installation or Replacement
• Graceful shutdown—Press and release the Power button. The software performs a graceful
shutdown of the server node.
• Emergency shutdown—Press and hold the Power button for 4 seconds to force the power off the
server node.
When the server node power button turns amber, it is safe to remove the server node from the chassis.
Removing Chassis and Component Covers
This section contains the following topics:
• Opening the Main Chassis Top Covers, page 3-12
• Removing a Server Node Cover, page 3-13
• Removing an I/O Expander Cover (C3X60 M4 and S3260 M5 Server Nodes Only), page 3-13
• Removing an I/O Expander From a Node (C3X60 M4 and S3260 M5 Server Nodes Only), page 3-13
• Removing the System I/O Controller (SIOC) Cover, page 3-13

Cisco UCS S3260 Specifications

General

Drive Bays	Up to 56
Maximum Storage Capacity	Up to 600 TB
Power Supply	Up to 4 hot-plug power supplies
Product Type	Storage Server Chassis
Supported Drives	SAS, SATA
Processors	Up to two Intel Xeon Scalable processors
Memory	Up to 1.5 TB DDR4 RAM
Power Supplies	Redundant 80+ Platinum power supplies
Total Drive Bays	56
Management	Cisco UCS Manager
Compatibility	Cisco UCS system
Form Factor	4U rack