Cisco UCS S3260 Service Manual

3-22
Cisco UCS S3260 Storage Server Chassis Installation and Service Guide
Chapter 3 Maintaining the System
Installing or Replacing System Components
Step 3 Install a new drive:
a. Align the new drive with the empty bay and then push the drive in until it touches the board
connector and the drive lever begins to close.
b. Press the drive lever down flat until it clicks and locks.
Figure 3-11 Drive Expander Module Drive Carrier Features
1 Drive lever 3 Drive fault LED
2 Release button 4 Drive activity LED
353455
4
3
1 2

Cisco UCS S3260 Specifications

General

Drive Bays	Up to 56
Maximum Storage Capacity	Up to 600 TB
Power Supply	Up to 4 hot-plug power supplies
Product Type	Storage Server Chassis
Supported Drives	SAS, SATA
Processors	Up to two Intel Xeon Scalable processors
Memory	Up to 1.5 TB DDR4 RAM
Power Supplies	Redundant 80+ Platinum power supplies
Total Drive Bays	56
Management	Cisco UCS Manager
Compatibility	Cisco UCS system
Form Factor	4U rack