Cisco UCS S3260 Service Manual

D-1
Cisco UCS S3260 Storage Server Chassis Installation and Service Guide
APPENDIX
D
Installation for Cisco UCS Manager
Integration
Cisco UCS manager integration requires Cisco UCS Manager 3.1(2) or later. You can integrate a system
that has either M3 or M4 server nodes, but the system must be using Cisco IMC 2.0(13) or later firmware.
The Cisco UCS integration instructions are in the GUI and CLI integration guides found here:
Cisco UCS S3260 Server Integration with UCS Manager Guides
Refer to the guide that is for the version of Cisco UCS Manager that you are using.

Cisco UCS S3260 Specifications

General

Drive Bays	Up to 56
Maximum Storage Capacity	Up to 600 TB
Power Supply	Up to 4 hot-plug power supplies
Product Type	Storage Server Chassis
Supported Drives	SAS, SATA
Processors	Up to two Intel Xeon Scalable processors
Memory	Up to 1.5 TB DDR4 RAM
Power Supplies	Redundant 80+ Platinum power supplies
Total Drive Bays	56
Management	Cisco UCS Manager
Compatibility	Cisco UCS system
Form Factor	4U rack