6-10
Cisco UCS Server Configuration Utility, Release 5.0
Chapter 6 Installing Operating Systems
Other OS Install
d. In the DNS Suffix/Domain field, specify the DNS suffix of the domain.The maximum limit is 25
characters.
e. In DNS Suffix Search Order 1 field, enter a DNS suffix search order. The maximum limit is 25
characters.
f. In the DNS Suffix Search Order 2 field, enter another DNS suffix search order. The maximum limit
is 25 characters.
g. In the Proxy Address field, enter the IP address or name of the proxy server. The maximum limit is
30 characters.
h. In the Port field, enter the port number of the proxy server. The maximum limit is 5 characters.
i. Edit the Network Settings by doing the following:
• Select a network interface and click Edit.
The Network Settings dialog box displays.
• Select IP Address from DHCP server or Static IP Address. If you select Static IP Address, do the
following:
–
In the IP Address field, enter the IPv4 address.
–
In the Subnet Mask field, enter the subnet IPv4 address.
–
In the Gateway field, enter the gateway IPv4 address.
–
In the DNS field, enter the DNS IPv4 address.
–
Click OK.
Installation Drivers
UCS-SCU displays all available drivers downloaded from the driver source. Deselect the drivers that you
do not want to install. If you want to install an operating system on a RAID volume, select the driver for
the appropriate RAID controller.
To configure the installation driver settings, follow these steps:
Step 1 Click Installation Drivers to open the corresponding window.
Step 2 Select the drivers that you want to install from the Choose Drivers to Install table.
If drivers are not available in the Choose Drivers to Install table, download the drivers using the
Installation Drivers toolbar. To download the drivers, choose one of the following options:
• Downloading from Cisco.com, page 6-10
• Downloading from SCU Boot media, page 6-11
• Downloading from Network Share, page 6-11
• Downloading from USB, page 6-12
Downloading from Cisco.com
To download the most recent drivers from the Cisco support website, follow these steps:
To Next Page
Loading...
Need help?
General
