42
Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Web GUI Deployment Guide, Cisco IOS XE Software Release 3.2.2
Configuration Examples
• User password = admin
• iEnable password = cisco
• HTTP credentials can be IGNORED
Step 70 Confirm Prime Infrastructure discovery of the CT5760—If reachable and successful, the status will
show as complete with the correct device type.
Step 71 Repeat the same steps by creating SNMP community strings on the 3850 and adding it to Prime
Infrastructure.
Step 72 Explore Cisco Prime Infrastructure GUI in management of CT5760, e.g. client statistics, details, reports
and so on.
To Next Page
Loading...
