Cisco Unified Access CT5760

16
Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Web GUI Deployment Guide, Cisco IOS XE Software Release 3.2.2
Configuration Examples
Authorization
This concludes the Radius and AAA configuration. Next section explains WLAN settings. Before
moving on, please save your configuration by clicking Save Configuration in the upper right hand side
of the GUI.
801.1x WLAN Configuration Example
In this section you will perform 802.1x WLAN configuration using ISE as a radius server
Step 19 Enabling 802.1x on the entire system.
Under Configuration tab, navigate to Controller > System > General