20
Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Web GUI Deployment Guide, Cisco IOS XE Software Release 3.2.2
Configuration Examples
Confirmation message appears. Click OK.
Step 22 Saving Config—Once client verification is done, save the configuration by selecting Save
Configuration in the upper right hand side of the screen.
Creating a Switch Peer Group (SPG) on Mobility Controller 5760 Example
In this section, you will be able to configure Switch Peer Group (SPG) and add members (Mobility
Agent) to the Group on the Mobility Controller (MC).
Step 23 On the 5760 controller GUI, navigate to Configuration > Controller > Mobility Management
To Next Page
Loading...
