Why is my Cisco Network Router showing a fan alarm?
If you receive a fan alarm on your Cisco Network Router, the system triggers an alarm because the fan has either stopped running or is running below a predefined RPM threshold.
Why is my Cisco Network Router showing a main board temperature alarm?
If your Cisco Network Router shows a main board temperature alarm, it signifies that the main board has a temperature sensing point that has crossed the predefined threshold level, triggering an alarm.
What to do if minor alarm is active on my Cisco vEdge 100m Network Router?
A yellow alarm condition on your Cisco Network Router requires further monitoring and/or maintenance.
General| Model | vEdge 100m |
|---|---|
| Product Type | Router |
| Category | Network Router |
| Form Factor | Desktop |
| USB Ports | 1 x USB 2.0 |
| Console Port | 1 x RJ45 |
| Power Supply | External AC Power Adapter |
| Encryption Support | Yes |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Product Family | Cisco vEdge |
| Memory | 4 GB |
| Storage | 8 GB |
| Operating System | Cisco SD-WAN Software |
| VPN Support | IPSec |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Humidity | 5 to 95% noncondensing |
| Altitude | 0 to 10, 000 feet |
Covers unpacking and rack mounting (two posts, four posts, mid-posts) for vEdge 2000.
Covers specs, environmental, and rack mounting requirements for vEdge 5000.
Details grounding, power, console, network connections, and default config for vEdge 5000.
Covers alarms, troubleshooting, and system status for the vEdge 5000.
To Next Page