Cisco vEdge 100m User Manual

You can download the Windows driver here .
To use the USB console from a Macintosh device:
1. Install the USB serial drivers attached here .
2. Launch the Terminal utility.
3. From a terminal shell, access the console port with this command:
$ screen /dev/tty.usbserial* 115200,cs8
vEdge 100 Router Default Configuration
The default configuration file looks like this:
vEdge100# show running-config
system
vbond ztp.viptela.com
aaa
auth-order local radius tacacs
usergroup basic
task system read write
task interface read write
Hardware Installation Guide for vEdge Routers
19
vEdge 100 Router
vEdge 100 Router Default Configuration

Cisco vEdge 100m Specifications

General

Brand	Cisco
Model	vEdge 100m
Category	Network Router
Language	English