Why is my Cisco vEdge 1000 showing a fan alarm?
If you receive a fan alarm on your Cisco Network Router, the system triggers an alarm because the fan has either stopped running or is running below a predefined RPM threshold.
Why is my Cisco Network Router showing a main board temperature alarm?
If your Cisco Network Router shows a main board temperature alarm, it signifies that the main board has a temperature sensing point that has crossed the predefined threshold level, triggering an alarm.
What to do if minor alarm is active on my Cisco Network Router?
A yellow alarm condition on your Cisco Network Router requires further monitoring and/or maintenance.
General| Model | vEdge 1000 |
|---|---|
| Product Type | Router |
| Form Factor | Rack-mountable |
| Rack Height | 1U |
| Storage | 64 GB SSD |
| Performance | Up to 2 Gbps |
| Network Interfaces | 2 x 10GE SFP+ |
| Power Supply | AC |
| Operating System | Viptela OS |
| Operating Temperature | 0 to 40 °C |
Step-by-step instructions for unpacking and mounting the vEdge 100 router.
Guides on connecting the router to AC power and a management console.
Step-by-step instructions for unpacking and mounting the vEdge 100b router.
Guides on connecting the router to AC power and a management console.
Step-by-step instructions for unpacking and installing the vEdge 100m router.
Guides on connecting the router to AC power and a management console.
Step-by-step instructions for unpacking and installing the vEdge 100wm router.
Guides on connecting the router to AC power and a management console.
Step-by-step instructions for unpacking and mounting the vEdge 1000 router in a rack.
Guides on connecting the router to system ground, AC power, and a management console.
Step-by-step instructions for unpacking and mounting the vEdge 2000 router in a rack.
Procedures for installing power supplies, fan trays, PIMs, and transceivers.
Procedures for removing power supplies, fan trays, PIMs, and transceivers.
Guides on connecting the router to system ground, AC power, and a management console.
Covers monitoring router status via LEDs and troubleshooting common alarms.
To Next Page