Cisco vEdge 100m User Manual

The management port uses an autosensing RJ-45 connector to support a 10/100/1000Base-T connection. The
two LEDs on the port indicate link/activity on the port and the administrative status of the port. See Management
Port LEDs below.
Table 4 provides the pinout information for the RJ-45 connector for the management port.
Table 82:
DescriptionSignalPin
Transmit/receive data pair
1
TRP1+1
Transmit/receive data pair
1
TRP1-2
Transmit/receive data pair
2
TRP2+3
Transmit/receive data pair
3
TRP3+4
Transmit/receive data pair
3
TRP3-5
Transmit/receive data pair
2
TRP2-6
Transmit/receive data pair
4
TRP4+7
Transmit/receive data pair
4
TRP4-8
Management Port LEDs
The management port on the vEdge 5000 router has two LEDs that indicate link/activity and port status. See
Figure 4.
Figure 4: LEDs on the Management Port on a vEdge 5000 Router
Hardware Installation Guide for vEdge Routers
231
vEdge 5000 Router
Ports and Connectors

Cisco vEdge 100m Specifications

General

Brand	Cisco
Model	vEdge 100m
Category	Network Router
Language	English