If you are returning any field-replaceable units with the router, repack them as described in Repack Router
Components below.
Repack Router Components
If you need to return any router components, follow these steps:
1. Ensure that you have the antistatic bag for each component and an ESD grounding strap.
2. Place each component in its antistatic bag.
3. Pack each component in its original packing material. If you do not have the original packing material,
ensure that the component is packed adequately with packing material to prevent any damage in transit.
4. Place the component in the original cardboard box or another cardboard box if the original is not available.
5. Secure the box with tape.
6. Write the RMA number on top of the box for purposes of tracking.
Hardware Installation Guide for vEdge Routers
25
vEdge 100 Router
Return Hardware
To Next Page
Loading...
Need help?
General
