CHAPTER
50-1
Cisco Unified Communications Manager Bulk Administration Guide
OL-24965-01
50
Inserting Gateways
Use the following topics to insert gateways into Cisco Unified Communications Manager database:
• Creating CSV Data Files for Cisco VG200 Gateways, page 50-1
• Creating CSV Data Files for Cisco VG224 Gateways, page 50-4
• Creating the CSV Data File for Cisco Catalyst 6000 (FXS) Ports, page 50-3
• Creating CSV Data Files for Cisco VG202 and VG204 Gateways, page 50-6
• Inserting Gateways to Cisco Unified Communications Manager, page 50-8
Creating CSV Data Files for Cisco VG200 Gateways
You can use the BAT spreadsheet to create a CSV data file for VG200 gateways and ports. See the
following section:
• Using the BAT Spreadsheet for CSV Data Files for Cisco VG200 T1 CAS, T1 PRI, E1 PRI, FXS,
or FXO Gateways and Ports, page 50-1
You can use a text editor to create a text file in CSV format for VG200 gateways and ports. See the
following section:
• Creating a Text-Based CSV File for Cisco VG200 Gateways, page A-14
Using the BAT Spreadsheet for CSV Data Files for Cisco VG200 T1 CAS, T1 PRI,
E1 PRI, FXS, or FXO Gateways and Ports
Use the BAT spreadsheet to create the CSV data file that contains the details, such as domain name,
MGCP description, and port identifier, for individual T1 CAS, T1 PRI, E1 PRI, FXS or FXO ports.
For information about installing and using the BAT spreadsheet, see the “Using the BAT Spreadsheet for
Gathering Data” section on page 1-8.
To create a text-based CSV data file for VG200 gateways, see the “T1 CAS, T1 PRI, or E1 PRI Trunks
File Format” section on page A-16 for information and examples.
To create a text-based CSV data file for VG200 gateways, see the “FXO or FXS Trunks CSV File
Format” section on page A-15 for information and examples.
To Next Page
Need help?
General
