Cisco VG320

CHAPTER 3
Installing the Cisco VG310 and Cisco VG320 Voice
Gateways
This document describes how to install and connect Cisco VG310 and Cisco VG320 voice gateways to LAN,
WAN, and voice networks. The following sections are included:
•
Safety Recommendations, page 23
•
General Safety Practices, page 25
•
Safety Tips, page 26
•
Preventing Electrostatic Discharge Damage, page 26
•
What You Need to Know, page 27
•
Before You Begin, page 27
•
Unpacking and Inspecting, page 27
•
Mounting the Chassis, page 27
•
Connecting Power, page 36
•
Connecting to a Console Terminal or Modem, page 41
•
Connecting a Gigabit Ethernet Port to a Gigabit Ethernet Switch, page 43
•
Ports and Cabling, page 43
•
Voice Cables, page 45
•
Ports, Connectors, and Pinouts, page 47
•
Remote Terminal Connections (If Applicable), page 48
•
Removing and Installing a CompactFlash Memory Card, page 49
Safety Recommendations
The following information is included to alert you about safety recommendations and best practices to be
followed when working with this equipment.
Cisco VG310 and Cisco VG320 Voice Gateways Hardware Installation Guide
OL-31292-01 23