B-1
Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide
OL-10100-11
APPENDIX
B
Cable and Connector Specifications
This appendix lists the cable and connector specifications for the Cisco 7600 route switch processors
(RSPs) and supervisor engines. It contains the following information:
• Supported Dense Wave Division Multiplexing (DWDM) Wavelength Optics, page B-2
• Supported Coarse Wave Division Multiplexing (CWDM) Wavelength Optics, page B-4
• Limiting Connection Distances, page B-5
• Uplink Port Transceiver Modules, page B-5
• Console Port Cabling Specifications and Pinouts, page B-10
• RJ-45 Connector, page B-14
• Fiber-Optic Connectors, page B-16
• LX/LH GBIC and MMF Cable Considerations, page B-19
To Next Page
Loading...
