■ SPECIFICATIONS
1. Type .............................................Multi-Hand Analog Solar Power Watch
2. Caliber No ....................................0870/0875
3. Time accuracy..............................±20 seconds per month
(temp. 5°C/41°F ~ 35°C/95°F)
4. Operational temperature range....–10°C ~ +60°C/14°F ~ 140°F
5. Display functions: Time...............Hour, minute, second and 24-hour hands
Calendar........Month, date
Alarm .............
Hour, minute and 24-hour hands, alarm ON/OFF
Chronograph..
Minute, second and 1/20 (0.05) second hands
6.
Additional functions:
Alarm .............Daily alarm (sounds for about 15 seconds)
Alarm monitor (Sounds for about 5 seconds)
Chronograph..Measurement is taken in 1/20 seconds and
for 60 minutes max. (A beep for start/stop/
split confirmation will sound when the
associated button is pressed.)
Insufficient Charge Warning Function
Stop Warning Function
Time Setting Warning Function
Overcharge Prevention Function
7. Secondary Battery Used ..............Titanium Lithium Ion secondary battery
35
A watchband will easily become soiled with dust and perspiration because it
is in direct contact with the skin. Even a stainless or gold-plated band may
begin to corrode if it has not been cleaned for a long period of time.
Mesh bands, because the meshes are very fine, will lose their particular
“flexibility” if they are left soiled for a long time.
Metal watchbands should be washed periodically to keep them looking
beautiful at all times.
Metal watchbands are usually washed with a brush in mild, soapy water and
well wiped with a soft, absorbent cloth to make sure all water is removed.
Pay attention to prevent any water from getting inside your watch when the
band is washed.
8. Periodic inspection
Getting your watch checked once every year or two is recommended to
ensure long use and trouble-free operation.
34
To Previous Page
Loading...
